actions/connect-tailscale/action.yml

@@ -28,9 +28,13 @@ inputs:
     required: false
     default: ""
   version:
-    description: "Tailscale version to install when tailscale is not on the runner, e.g. 1.80.2. Pin it; latest is allowed"
+    description: "Exact Tailscale version to install when tailscale is not on the runner, e.g. 1.80.2. Empty uses the installed tailscale and fails when there is none"
     required: false
-    default: "latest"
+    default: ""
+  sha256:
+    description: "Optional SHA-256 of the downloaded archive tailscale_<version>_<arch>.tgz; the install fails when it differs"
+    required: false
+    default: ""
   userspace-networking:
     description: >-
       true runs tailscaled without a TUN device (no NET_ADMIN needed); tailnet
@@ -70,6 +74,7 @@ runs:
         TS_TAGS: ${{ inputs.tags }}
         TS_HOSTNAME: ${{ inputs.hostname }}
         TS_VERSION: ${{ inputs.version }}
+        TS_SHA256: ${{ inputs.sha256 }}
         TS_USERSPACE: ${{ inputs.userspace-networking }}
         TS_ARGS: ${{ inputs.args }}
         TS_TIMEOUT: ${{ inputs.timeout }}

actions/connect-tailscale/connect-tailscale.sh

@@ -7,14 +7,24 @@
 #
 # Settings come from the environment, never from interpolated expressions:
 #   TS_AUTHKEY, TS_OAUTH_SECRET, TS_TAGS, TS_HOSTNAME, TS_VERSION, TS_USERSPACE,
-#   TS_ARGS, TS_TIMEOUT, TS_HEALTH_CHECK_HOST. TS_TAILSCALE, TS_TAILSCALED,
+#   TS_SHA256, TS_ARGS, TS_TIMEOUT, TS_HEALTH_CHECK_HOST. TS_TAILSCALE,
-#   TS_SUDO and TS_STATE_DIR name the commands and the work folder, for the tests.
+#   TS_TAILSCALED, TS_SUDO, TS_STATE_DIR, TS_START_WAIT (tries) and
+#   TS_WAIT_INTERVAL (seconds) name the commands, the work folder and the waits,
+#   for the tests.
 # The auth key is passed to tailscale in a file of mode 600, never on a command
 # line. Every failure is printed as ::error::[category] message.
 
 TS_TAILSCALE="${TS_TAILSCALE:-tailscale}"
 TS_TAILSCALED="${TS_TAILSCALED:-tailscaled}"
-SUDO="${TS_SUDO-sudo}"
+# sudo is used only when the job is not root: a job container runs as root and
+# often has no sudo. TS_SUDO overrides it (empty for none).
+if [ -n "${TS_SUDO+x}" ]; then
+  SUDO="$TS_SUDO"
+elif [ "$(id -u)" = "0" ]; then
+  SUDO=""
+else
+  SUDO="sudo"
+fi
 STATE_DIR="${TS_STATE_DIR:-${RUNNER_TEMP:-/tmp}/tailscale}"
 
 fail() {
@@ -46,11 +56,13 @@ validate_inputs() {
   fi
   [[ "$TS_TIMEOUT" =~ ^[0-9]+$ ]] ||
     fail configuration "timeout must be a number of seconds."
-  [[ "$TS_VERSION" =~ ^(latest|[0-9]+\.[0-9]+\.[0-9]+)$ ]] ||
+  [[ "$TS_VERSION" =~ ^([0-9]+\.[0-9]+\.[0-9]+)?$ ]] ||
-    fail configuration "version must be latest or like 1.80.2."
+    fail configuration "version must be an exact version like 1.80.2."
+  [[ "${TS_SHA256:-}" =~ ^([0-9a-fA-F]{64})?$ ]] ||
+    fail configuration "sha256 must be 64 hexadecimal digits."
   case "$TS_USERSPACE" in
-  true | false) ;;
+    true | false) ;;
-  *) fail configuration "userspace-networking must be true or false." ;;
+    *) fail configuration "userspace-networking must be true or false." ;;
   esac
   [[ "${TS_HOSTNAME:-}" =~ ^[a-zA-Z0-9-]*$ ]] ||
     fail configuration "hostname may hold letters, digits and hyphens only."
@@ -58,14 +70,16 @@ validate_inputs() {
 
 machine_arch() {
   case "$(uname -m)" in
-  x86_64 | amd64) echo amd64 ;;
+    x86_64 | amd64) echo amd64 ;;
-  aarch64 | arm64) echo arm64 ;;
+    aarch64 | arm64) echo arm64 ;;
-  *) fail environment "no Tailscale build for $(uname -m)." ;;
+    *) fail environment "no Tailscale build for $(uname -m)." ;;
   esac
 }
 
 install_tools() {
   command -v "$TS_TAILSCALE" >/dev/null 2>&1 && command -v "$TS_TAILSCALED" >/dev/null 2>&1 && return 0
+  [ -n "$TS_VERSION" ] ||
+    fail configuration "tailscale is not on the runner; set version (for example 1.80.2) so it can be installed."
   local arch url tmp
   arch="$(machine_arch)"
   url="https://pkgs.tailscale.com/stable/tailscale_${TS_VERSION}_${arch}.tgz"
@@ -73,6 +87,10 @@ install_tools() {
   tmp="$(mktemp -d)"
   curl -fsSL "$url" -o "$tmp/tailscale.tgz" ||
     fail environment "could not download $url."
+  if [ -n "${TS_SHA256:-}" ]; then
+    echo "${TS_SHA256}  $tmp/tailscale.tgz" | sha256sum -c --quiet - ||
+      fail environment "the downloaded archive does not match sha256."
+  fi
   tar -xzf "$tmp/tailscale.tgz" -C "$tmp" --strip-components=1 ||
     fail environment "could not unpack the Tailscale archive."
   $SUDO install -m 755 "$tmp/tailscale" "$tmp/tailscaled" /usr/local/bin/ ||
@@ -80,13 +98,34 @@ install_tools() {
   rm -rf "$tmp"
 }
 
+daemon_answers() {
+  "$TS_TAILSCALE" version --daemon >/dev/null 2>&1
+}
+
 start_daemon() {
+  # a daemon that already runs belongs to the host; this action would log it out
+  if daemon_answers; then
+    fail environment "a tailscaled already runs on this runner; the action starts its own and must not take over the host's. Use it on a job container."
+  fi
   local args=(--state=mem:)
   if [ "$TS_USERSPACE" = "true" ]; then
     args+=(--tun=userspace-networking --socks5-server=localhost:1055)
   fi
   mkdir -p "$STATE_DIR"
   $SUDO nohup "$TS_TAILSCALED" "${args[@]}" >"$STATE_DIR/tailscaled.log" 2>&1 &
+  : >"$STATE_DIR/started-by-action"
+  wait_for_daemon
+}
+
+# wait_for_daemon: tailscaled needs a moment to create its socket
+wait_for_daemon() {
+  local tries="${TS_START_WAIT:-30}" i
+  for ((i = 0; i < tries; i++)); do
+    daemon_answers && return 0
+    sleep "${TS_WAIT_INTERVAL:-1}"
+  done
+  fail connection "tailscaled did not answer in $tries tries; the last lines of its log: $(tail -n 5 "$STATE_DIR/tailscaled.log" 2>/dev/null | tr '
+' ' ')"
 }
 
 # write_key_file: the auth key in a file of mode 600; prints its path
@@ -127,6 +166,11 @@ tailnet_up() {
 }
 
 tailnet_down() {
+  # only a daemon this action started is logged out and stopped
+  if [ ! -f "$STATE_DIR/started-by-action" ]; then
+    echo "This action did not start tailscaled on this runner; nothing to do."
+    return 0
+  fi
   $SUDO "$TS_TAILSCALE" logout 2>/dev/null || echo "The node was not logged in."
   $SUDO "$TS_TAILSCALE" down 2>/dev/null || true
   $SUDO pkill -x "$(basename "$TS_TAILSCALED")" 2>/dev/null || true
@@ -138,12 +182,12 @@ main() {
   set -uo pipefail
   TS_USERSPACE="${TS_USERSPACE:-false}"
   TS_TIMEOUT="${TS_TIMEOUT:-60}"
-  TS_VERSION="${TS_VERSION:-latest}"
+  TS_VERSION="${TS_VERSION:-}"
   case "${1:-}" in
-  mask) mask_secrets ;;
+    mask) mask_secrets ;;
-  up) tailnet_up ;;
+    up) tailnet_up ;;
-  down) tailnet_down ;;
+    down) tailnet_down ;;
-  *) fail configuration "unknown command '${1:-}'; use mask, up or down." ;;
+    *) fail configuration "unknown command '${1:-}'; use mask, up or down." ;;
   esac
 }
 

guides/vpn-tailscale.md

@@ -5,8 +5,8 @@ a Gitea Actions runner, so the next steps of the same job (a deployment over
 SSH, a migration) can reach hosts on the tailnet. It does what the GitHub
 marketplace action `tailscale/github-action` does, written for Gitea Actions:
 that action is built for GitHub and has not been verified on Gitea. It is
-**experimental**: it lives on the branch `wireguard-vpn-action` until a trial
+**experimental**: it is on `main` but not released, and it has not yet run on a
-shows it is wanted. For a plain tunnel without a third-party service, see
+runner with a real tailnet (MIL-012). For a plain tunnel without a third-party service, see
 [WireGuard](vpn-wireguard.md).
 
 A node belongs to one job: every job that deploys joins on its own and logs out
@@ -23,7 +23,7 @@ jobs:
       - uses: actions/checkout@v4.2.2
 
       - name: Connect Tailscale
-        uses: TirSystem/github-action/actions/connect-tailscale@v2
+        uses: TirSystem/github-action/actions/connect-tailscale@main
         with:
           oauth-secret: ${{ secrets.TS_OAUTH_SECRET }}
           tags: tag:ci
@@ -35,16 +35,17 @@ jobs:
 
       - name: Disconnect Tailscale
         if: always()
-        uses: TirSystem/github-action/actions/connect-tailscale@v2
+        uses: TirSystem/github-action/actions/connect-tailscale@main
         with:
           action: down
 ```
 
 If the short form does not resolve on your instance (Gitea looks for the action
 on the host set in `DEFAULT_ACTIONS_URL`), use the full address:
-`https://git.tirsystem.com/TirSystem/github-action/actions/connect-tailscale@v2`.
+`https://git.tirsystem.com/TirSystem/github-action/actions/connect-tailscale@main`.
-To try the branch before it is released, replace `@v2` with
+
-`@wireguard-vpn-action`.
+Until release 2.2.0 the actions exist only on `main`, so the examples call
+`@main`; `@v2` does not contain them yet. After the release, use `@v2`.
 
 ## Inputs
 
@@ -55,7 +56,8 @@ To try the branch before it is released, replace `@v2` with
 | `oauth-secret` | | The secret of an OAuth client with the scope `auth_keys`, as a secret. Needs `tags` |
 | `tags` | | ACL tags of the node, `tag:ci` or `tag:ci,tag:deploy`. Required with `oauth-secret` |
 | `hostname` | runner name | Name of the node in the tailnet |
-| `version` | `latest` | The version to install when the runner has no `tailscale`. Pin it |
+| `version` | | The exact version to install when the runner has no `tailscale`, for example `1.80.2`. Empty uses the installed one and fails when there is none |
+| `sha256` | | The SHA-256 of the downloaded archive `tailscale_<version>_<arch>.tgz`; the install fails when it differs. Recommended |
 | `userspace-networking` | `false` | `true` runs without a TUN device |
 | `args` | | Extra flags for `tailscale up`, for example `--accept-routes`. Never a secret |
 | `timeout` | `60` | Seconds to wait for the node |
@@ -74,15 +76,23 @@ To try the branch before it is released, replace `@v2` with
    start with `GITEA_` or `GITHUB_`.
 4. Rotate the secret when a person with access leaves.
 
-The node is ephemeral and its state is kept in memory, so it disappears from the
+The state of the node is kept in memory. With an OAuth client the key is
-tailnet when the job ends, even if the last step does not run.
+ephemeral, so the node disappears from the tailnet when the job ends, even if
+the last step does not run. With an auth key that is not ephemeral, a cancelled
+job can leave the node in the tailnet until `down` runs or it is removed in the
+admin console: create the key as ephemeral.
 
 ## The runner
 
-- The job runs as root or can use `sudo`. The action downloads the Tailscale
+- The job runs as root, or `sudo` is available (the action uses `sudo` only
-  binaries from `pkgs.tailscale.com` when `tailscale` is not on the runner.
+  when the job is not root). The action downloads the Tailscale binaries from
-  Pin `version`; a runner image that already contains Tailscale skips the
+  `pkgs.tailscale.com` when `tailscale` is not on the runner; `version` is then
-  download.
+  required, and `sha256` makes the install check the archive. A runner image
+  that already contains Tailscale skips the download.
+- The action starts its own `tailscaled`. It refuses to run when a `tailscaled`
+  already answers on the runner, because that daemon belongs to the host and
+  `down` would log it out: use the action on job containers, not on a runner
+  that runs jobs directly on a host with its own Tailscale.
 - **TUN mode** (the default) needs the capability `NET_ADMIN` and the device
   `/dev/net/tun` in the runner container: in the `act_runner` configuration set
   under `container:` `options: "--cap-add=NET_ADMIN --device=/dev/net/tun"`.
@@ -107,7 +117,9 @@ tailnet when the job ends, even if the last step does not run.
   never on a command line, and deletes the file at once;
 - prints errors as `::error::[category] message`, with the categories
   `configuration`, `environment` and `connection`;
-- on `down` logs the node out, stops `tailscaled` and deletes its work folder.
+- waits until `tailscaled` answers before `tailscale up` (up to 30 seconds);
+- on `down` logs the node out, stops `tailscaled` and deletes its work folder,
+  and only when this action started that daemon.
 
 The `file:` form of `--auth-key` needs a recent Tailscale; with an old pinned
 version `tailscale up` reports an invalid key.

tests/test_connect_tailscale.py

@@ -36,6 +36,11 @@ case "$1" in
     done
     exit "${UP_EXIT:-0}" ;;
   ping) exit "${PING_EXIT:-0}" ;;
+  version)
+    # the daemon answers only after tailscaled was started, and after DAEMON_DELAY calls
+    [ -f "$STUB_DAEMON" ] || exit 1
+    n=$(( $(cat "$STUB_DAEMON") + 1 )); echo "$n" > "$STUB_DAEMON"
+    [ "$n" -gt "${DAEMON_DELAY:-0}" ] ;;
 esac
 """
 
@@ -52,13 +57,19 @@ def make_stub(path: Path, body: str) -> None:
 
 def run(tmp_path: Path, command: str, **env: str) -> subprocess.CompletedProcess:
     make_stub(tmp_path / "tailscale", TAILSCALE_STUB)
-    make_stub(tmp_path / "tailscaled", "#!/usr/bin/env bash\necho \"$*\" >> \"$STUB_LOG\"\n")
+    make_stub(
+        tmp_path / "tailscaled",
+        '#!/usr/bin/env bash\necho "$*" >> "$STUB_LOG"\necho 0 > "$STUB_DAEMON"\n',
+    )
     full = {
         "PATH": f"{tmp_path}:{os.environ['PATH']}",
         "TS_SUDO": "",
         "TS_STATE_DIR": str(tmp_path / "state"),
         "STUB_LOG": str(tmp_path / "log"),
         "STUB_KEY": str(tmp_path / "key"),
+        "STUB_DAEMON": str(tmp_path / "daemon"),
+        "TS_WAIT_INTERVAL": "0.05",
+        "TS_START_WAIT": "100",
         **env,
     }
     return subprocess.run(
@@ -77,7 +88,7 @@ class TestDefinition:
     def test_inputs_are_the_contract(self, document):
         assert set(document["inputs"]) == {
             "action", "authkey", "oauth-secret", "tags", "hostname", "version",
-            "userspace-networking", "args", "timeout", "health-check-host",
+            "sha256", "userspace-networking", "args", "timeout", "health-check-host",
         }
 
     def test_uses_gitea_contexts_only(self):
@@ -124,6 +135,8 @@ class TestUp:
             ({"TS_AUTHKEY": AUTHKEY, "TS_TAGS": "ci"}, "tags must look like"),
             ({"TS_AUTHKEY": AUTHKEY, "TS_TIMEOUT": "soon"}, "timeout"),
             ({"TS_AUTHKEY": AUTHKEY, "TS_VERSION": "1.x"}, "version"),
+            ({"TS_AUTHKEY": AUTHKEY, "TS_VERSION": "latest"}, "version"),
+            ({"TS_AUTHKEY": AUTHKEY, "TS_SHA256": "abc"}, "sha256"),
             ({"TS_AUTHKEY": AUTHKEY, "TS_USERSPACE": "yes"}, "userspace-networking"),
             ({"TS_AUTHKEY": AUTHKEY, "TS_HOSTNAME": "bad name"}, "hostname"),
         ],
@@ -148,6 +161,40 @@ class TestUp:
         assert "health-check-host" in result.stdout
 
 
+class TestDaemon:
+    def test_waits_until_the_daemon_answers(self, tmp_path):
+        result = run(tmp_path, "up", TS_AUTHKEY=AUTHKEY, DAEMON_DELAY="5")
+        assert result.returncode == 0, result.stdout
+        assert "up --auth-key" in log(tmp_path)
+
+    def test_a_daemon_that_never_answers_fails_before_up(self, tmp_path):
+        result = run(tmp_path, "up", TS_AUTHKEY=AUTHKEY, DAEMON_DELAY="1000", TS_START_WAIT="3")
+        assert result.returncode == 1
+        assert "::error::[connection] tailscaled did not answer" in result.stdout
+        assert "up --auth-key" not in log(tmp_path)
+
+    def test_a_daemon_of_the_host_is_not_taken_over(self, tmp_path):
+        (tmp_path / "daemon").write_text("0", encoding="utf-8")
+        result = run(tmp_path, "up", TS_AUTHKEY=AUTHKEY)
+        assert result.returncode == 1
+        assert "::error::[environment] a tailscaled already runs" in result.stdout
+        calls = log(tmp_path)  # only the probe ran: no second daemon, no up
+        assert "--state=mem:" not in calls
+        assert "up --auth-key" not in calls
+
+    def test_down_leaves_a_daemon_it_did_not_start(self, tmp_path):
+        (tmp_path / "daemon").write_text("0", encoding="utf-8")
+        result = run(tmp_path, "down")
+        assert result.returncode == 0
+        assert "nothing to do" in result.stdout
+        assert not (tmp_path / "log").exists()
+
+    def test_without_tailscale_a_version_is_required(self, tmp_path):
+        result = run(tmp_path, "up", TS_AUTHKEY=AUTHKEY, TS_TAILSCALE="no-such-tailscale")
+        assert result.returncode == 1
+        assert "::error::[configuration] tailscale is not on the runner; set version" in result.stdout
+
+
 class TestDownAndMask:
     def test_down_logs_out_and_removes_the_state(self, tmp_path):
         run(tmp_path, "up", TS_AUTHKEY=AUTHKEY)