git-workflows/guides/vpn-wireguard.md

Reaching a private network with WireGuard

The composite action actions/connect-wireguard brings a WireGuard tunnel up on a Gitea Actions runner, so the next steps of the same job (a deployment over SSH, a database migration) can reach hosts that are not on the internet. It is the WireGuard counterpart of the Tailscale action. It is experimental: it is released in 2.2.0, and it has not yet run on a runner with a real tunnel (MIL-012).

A tunnel belongs to one job: every job that deploys brings its own tunnel up and takes it down. It cannot be a reusable workflow, because a called workflow runs as a separate job.

Use it

jobs:
  deploy:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4.2.2

      - name: Connect the VPN
        uses: TirSystem/github-action/actions/connect-wireguard@v2
        with:
          config: ${{ secrets.WG_CONFIG }}
          health-check-host: 10.8.0.1

      - name: Deploy
        run: ssh deploy@10.8.0.10 ./deploy.sh

      - name: Disconnect the VPN
        if: always()
        uses: TirSystem/github-action/actions/connect-wireguard@v2
        with:
          action: down

If the short form does not resolve on your instance (Gitea looks for the action on the host set in DEFAULT_ACTIONS_URL), use the full address: https://git.tirsystem.com/TirSystem/github-action/actions/connect-wireguard@v2.

Inputs

Input	Default	Meaning
action	up	up or down
config		A complete wg-quick file, as a secret. When set, the fields below are ignored
private-key, address, peer-public-key, endpoint, allowed-ips		The fields of a configuration, all five needed without config
preshared-key, dns		Optional
persistent-keepalive	25	Seconds
interface	wg0	Interface name
health-check-host		A host behind the tunnel; the step fails when it does not answer a ping

Set it up

1. On the WireGuard server add one peer for CI, with its own key pair and an address inside the tunnel (10.8.0.2/32). Let it reach only the hosts the deployment needs.
2. Store the configuration (or the private key) as a secret of the organization, never in the repository. Give the secret a name that does not start with GITEA_ or GITHUB_.
3. Set allowed-ips to the private network only. 0.0.0.0/0 sends all of the job's traffic, including the checkout, through the tunnel.
4. Rotate the key when a person with access to the secret leaves.

The runner must allow it

A tunnel needs a network interface, so the runner needs more than a plain job container:

• the job runs as root, or sudo is available (the action uses sudo only when the job is not root, and installs wireguard-tools with apt when it is missing, so a Debian or Ubuntu image);
• the container has the capability NET_ADMIN and the device /dev/net/tun. In the act_runner configuration set under container: options: "--cap-add=NET_ADMIN --device=/dev/net/tun";
• without the kernel module the action uses wireguard-go (user space), which needs the same capability and device.

Use a dedicated runner with a label of its own (for example vpn) and put runs-on: vpn on the jobs that need it, so the other jobs do not get the extra privilege.

What the action does

• masks the keys in the log before anything else (the values of PrivateKey and PresharedKey of a full configuration, and the key inputs);
• refuses an input that holds a line break, because an extra line in the file could add a PostUp command that runs as root;
• writes /etc/wireguard/<interface>.conf with mode 600 and brings it up with wg-quick (through env, so the wireguard-go choice survives sudo); the file is removed again when the interface does not come up;
• prints errors as ::error::[category] message, with the categories configuration, environment and connection;
• on down takes the interface down and deletes the file.

It never prints a key. Do not turn on shell tracing (set -x) in the steps that follow.

Troubleshooting

Message	Cause
[configuration] ... is empty	Neither config nor all five fields were given
[environment] ... NET_ADMIN and /dev/net/tun	The runner container lacks the capability or the device
[connection] wg-quick could not bring wg0 up	A wrong key, endpoint or a firewall; run wg show on the server
[connection] health-check-host ... does not answer	The tunnel is up but the host is not in allowed-ips, or is blocked