CHANGELOG.md

@@ -20,6 +20,8 @@ Each release lists its changes in these groups, in this order:
 
 ## [Unreleased]
 
+## [2.2.0] - 2026-10-21
+
 ### Added
 
 - `english-comments.yml`, a reusable workflow that judges the language of the comments and docstrings a pull request adds, fails the run when one is not English and writes one comment on the pull request that mentions the author (ADR-0012), with the scripts `tools/english_comments.py` and `tools/english_comments_report.py`, the guide `guides/english-comments.md` and wiki pages in three languages. The scanner of `tools/count_loc.py` can return the text of the comments it finds.

docs/wiki/EnglishComments.da.md

@@ -1,4 +1,4 @@
-<!-- translation of EnglishComments.md, source sha256 98f3d6e44d62 -->
+<!-- translation of EnglishComments.md, source sha256 9dafcabbc807 -->
 
 > Dette er en oversættelse af [`EnglishComments`](EnglishComments). Den engelske side er autoritativ, og ændringer her bliver overskrevet, næste gang wikien publiceres.
 
@@ -28,9 +28,6 @@ jobs:
       allowed-words-file: .english-comments-allowed-words
 ```
 
-Indtil udgivelse 2.3.0 findes workflowet kun på `main`, så kald det med `@main`; `@v2` indeholder det
-endnu ikke.
-
 | Input | Standard | Betydning |
 | --- | --- | --- |
 | `scope` | `changed` | `changed` kontrollerer kommentarerne på de linjer, pull requesten tilføjer; `all` kontrollerer hver sporet fil |

docs/wiki/EnglishComments.md

@@ -28,9 +28,6 @@ jobs:
       allowed-words-file: .english-comments-allowed-words
 ```
 
-Until release 2.3.0 the workflow exists only on `main`, so call it at `@main`; `@v2` does not
-contain it yet.
-
 | Input | Default | Meaning |
 | --- | --- | --- |
 | `scope` | `changed` | `changed` checks the comments on the lines the pull request adds; `all` checks every tracked file |

docs/wiki/EnglishComments.ms.md

@@ -1,4 +1,4 @@
-<!-- translation of EnglishComments.md, source sha256 98f3d6e44d62 -->
+<!-- translation of EnglishComments.md, source sha256 9dafcabbc807 -->
 
 > Ini ialah terjemahan [`EnglishComments`](EnglishComments). Halaman bahasa Inggeris ialah teks yang sah, dan perubahan di sini akan ditimpa pada penerbitan wiki yang seterusnya.
 
@@ -29,9 +29,6 @@ jobs:
       allowed-words-file: .english-comments-allowed-words
 ```
 
-Sehingga keluaran 2.3.0, aliran kerja hanya wujud pada `main`, jadi panggil dengan `@main`; `@v2` belum
-mengandunginya.
-
 | Input | Lalai | Maksud |
 | --- | --- | --- |
 | `scope` | `changed` | `changed` menyemak komen pada baris yang ditambah oleh pull request; `all` menyemak setiap fail yang dijejaki |

guides/english-comments.md

@@ -22,9 +22,6 @@ jobs:
       allowed-words-file: .english-comments-allowed-words
 ```
 
-Until release 2.3.0 the workflow exists only on `main`, so call it at `@main`; `@v2` does not
-contain it yet.
-
 | Input | Default | Meaning |
 | --- | --- | --- |
 | `scope` | `changed` | `changed` checks the comments on the lines the pull request adds; `all` checks every tracked file |

guides/vpn-tailscale.md

@@ -5,7 +5,7 @@ a Gitea Actions runner, so the next steps of the same job (a deployment over
 SSH, a migration) can reach hosts on the tailnet. It does what the GitHub
 marketplace action `tailscale/github-action` does, written for Gitea Actions:
 that action is built for GitHub and has not been verified on Gitea. It is
-**experimental**: it is on `main` but not released, and it has not yet run on a
+**experimental**: it is released in 2.2.0, and it has not yet run on a
 runner with a real tailnet (MIL-012). For a plain tunnel without a third-party service, see
 [WireGuard](vpn-wireguard.md).
 
@@ -23,7 +23,7 @@ jobs:
       - uses: actions/checkout@v4.2.2
 
       - name: Connect Tailscale
-        uses: TirSystem/github-action/actions/connect-tailscale@main
+        uses: TirSystem/github-action/actions/connect-tailscale@v2
         with:
           oauth-secret: ${{ secrets.TS_OAUTH_SECRET }}
           tags: tag:ci
@@ -35,17 +35,14 @@ jobs:
 
       - name: Disconnect Tailscale
         if: always()
-        uses: TirSystem/github-action/actions/connect-tailscale@main
+        uses: TirSystem/github-action/actions/connect-tailscale@v2
         with:
           action: down
 ```
 
 If the short form does not resolve on your instance (Gitea looks for the action
 on the host set in `DEFAULT_ACTIONS_URL`), use the full address:
-`https://git.tirsystem.com/TirSystem/github-action/actions/connect-tailscale@main`.
+`https://git.tirsystem.com/TirSystem/github-action/actions/connect-tailscale@v2`.
-
-Until release 2.2.0 the actions exist only on `main`, so the examples call
-`@main`; `@v2` does not contain them yet. After the release, use `@v2`.
 
 ## Inputs
 

guides/vpn-wireguard.md

@@ -4,8 +4,8 @@ The composite action `actions/connect-wireguard` brings a WireGuard tunnel up on
 a Gitea Actions runner, so the next steps of the same job (a deployment over
 SSH, a database migration) can reach hosts that are not on the internet. It is
 the WireGuard counterpart of the Tailscale action. It is **experimental**: it
-is on `main` but not released, and it has not yet run on a runner with a real
+is released in 2.2.0, and it has not yet run on a runner with a real tunnel
-tunnel (MIL-012).
+(MIL-012).
 
 A tunnel belongs to one job: every job that deploys brings its own tunnel up
 and takes it down. It cannot be a reusable workflow, because a called workflow
@@ -21,7 +21,7 @@ jobs:
       - uses: actions/checkout@v4.2.2
 
       - name: Connect the VPN
-        uses: TirSystem/github-action/actions/connect-wireguard@main
+        uses: TirSystem/github-action/actions/connect-wireguard@v2
         with:
           config: ${{ secrets.WG_CONFIG }}
           health-check-host: 10.8.0.1
@@ -31,17 +31,14 @@ jobs:
 
       - name: Disconnect the VPN
         if: always()
-        uses: TirSystem/github-action/actions/connect-wireguard@main
+        uses: TirSystem/github-action/actions/connect-wireguard@v2
         with:
           action: down
 ```
 
 If the short form does not resolve on your instance (Gitea looks for the action
 on the host set in `DEFAULT_ACTIONS_URL`), use the full address:
-`https://git.tirsystem.com/TirSystem/github-action/actions/connect-wireguard@main`.
+`https://git.tirsystem.com/TirSystem/github-action/actions/connect-wireguard@v2`.
-
-Until release 2.2.0 the actions exist only on `main`, so the examples call
-`@main`; `@v2` does not contain them yet. After the release, use `@v2`.
 
 ## Inputs